x86 ret instruction
ret instruction in 8086
assembly ret example
during the execution of ret instruction choose the correct sequence
ret instruction equivalent
ret instruction example
ret assembly x64
assembly return value

The RET instruction pops the high-order and low-order bytes of the PC from the stack (and decrements the stack pointer by 2). Program execution resumes fromRET stands for RETURN from the Subroutine. · After execution of this instruction program, control is transferred back to the main program from where it had The RET instruction can be used to execute three different types of returns: Since a stack switch also occurs on an inter-privilege level return, Transfers program control to a return address located on the top of the stack. The address is usually placed on the stack by a CALL instruction, and the return The RET instruction pops the return address off the stack (which is pointed to by the stack pointer register) and then continues execution at that address. When executing a near return, the processor pops the return instruction pointer (offset) from the top of the stack into the EIP register and begins program When the call X5 instruction is executed, the next instruction is fetched from memory location X5, the start of the X5 subroutine. At the end of the subroutine,