ERICSSON EFC 11 Manuals. Corning Siecor FBC-001 Manuals. Fujikura CT-100 Manuals. PK Technology FK11 Manuals. Corning FBC-012 Manuals. PK Technology FK12 Manuals. Fujikura CT-03 Manuals. FiTeL S325A Manuals. Fujikura CT-04B Manuals. Ribbon-splicers are using) which has made it possible to keep the size small of the unit. It also makes this unit extremely cost-e%%ective. The SBFS1 is one o%the most inexpensive s plicers on the market, yet with a per% rmance o%4-5 times more expensive units. The EasySplicer is truly a grand innovation for making Fiber optic Networks. S179A FUSION SPLICER USER MANUAL Issue 4 . 1 Contents 1. Safety Information and Instructions _____ 4 1.1 Safety Information _____ 4 If the fusion splicer is dropped and damaged, turn off the power switch, disconnect the power cable, remove the battery, and contact Furukawa Electric Co., Ltd. or your local representative. electrodes of the splicer, to clean fiber dust and alcohol, but cannotremoveburrsonthefiberend-face. Gapping key. Press it to complete gap adjustment, including fiberpush,fiberclean,judgment anddisplayoffiberend-face angle, adjustment of fiber axial position as desired. After Fusion Splicer User Manual 9 Operational safety warnings • Do not use the splicer in places where there is a risk of explosion. • Do not touch the electrodes when the splicer is switched on. • To avoid an electric shock, Do not open the back of the splicer or the power supply. There are no user-serviceable parts inside the splicer, so refer any service of the splicer to qualified personnel. The splicer has been designed for splicing Silica-based optical fibers for telecommunications. Do not attempt to use this machine for other applications. Fujikura Ltd. gives much consideration and regard to personal injury. Misuse of the machine may result in electric shock, fire and/or serious personal injury. Once both cables are in place inside the Fusion Splicer, close the dust/weather guard. The Fusion Splicer will automatically move the fibers in towards each other and an image of the two fiber tips will be displayed onto the screen for you to examine. Of the two pictures above, the picture on the left shows two good cleaves. user manual optical fiber fusion splicer please read this instruction manual carefully before operating the equipment. adhere to all safety instructions and warnings contained in this manual. keep this manual in a safe place. fs20e shenzhen speedwolf technology co., ltd. Optical Fiber Fusion Splicer User Manual . Fiberer Global Tech Ltd NO. 1 Service NO.1 Quality Tel: 86-755-21910661 Fax: 86-755-33229601 fiberer.com sales@fiberer.com 2 Optical Fiber Fusion Splicer User Manual 1 General information 1.1 Applicable range 1.2 Specifications 2 Terms about FUSION SPLICER Preface ThankyouverymuchforchoosingtheSFS-7000SeriesOpticalFiberFusion Splicer produced by Saluki.The following manual will mainly introduce the S179A FUSION SPLICER USER MANUAL Issue 3 . 1 Contents 1. Safety Information and Instructions _____ 4 1.1 Safety Information _____ 4 If the fusion splicer is dropped and damaged, turn off the power switch, disconnect the power cable, remove the battery, and contact Furukawa Electric Co., Ltd. or your local representative. A complete Butler System Owner's Manual with five (5) Maintenance Records Booklets and a Warranty Booklet is included with each new and pre-owned Butler System when purchased. The Maintenance Records Booklets and the Warranty Booklet have b