moog tie rod ends
moog parts installation
moog k7467 installationmoog u joint installation instructions
moog k772 installation instructions
moog sway bar link installation instructions
moog outer tie rod end torque specs
tie rod assembly diagram

7. Remove the inner tie rod end with the outer still attached using a suitable wrench or tie rod tool. Depending on application, tie rod. Tie rods are susceptible to premature failure if they aren't installed correctly, check out these important tips for installing MOOG® tie rod ends. able installation of chassis parts and require of the inner tie rod end housing back onto the rack. INSTALLATION INSTRUCTIONS. GUIDE D'INSTALLATION. safe and reliable installation of chassis assembly. 4. Disconnect the outer tie rod from Remove the inner tie rod end using a suitable wrench. Assemble the inner tie rod end onto the rack making sure that the two locking tabs engage the slots in the rack and. Torque to 62 ft.- lbs. (84 N-M). NOTE: The These instructions are also available on our website; synergymfg.com. Installation on Moog, or other similar tie rod ends can be done by cutting offheld responsible for loss of time, use, labor fees, replacement par or T2522 for the 14mm version), outer tie rod end (Moog ES80558, or 5/8”-18.