The MegaRAID SAS 9270-8i RAID controller has a 1-GB non-volatile DDR3 1333MT/s transportable memory module. The TMM02 unit connects remotely to the LSI fileslib. If you own a HP controller cards and have a user manual in electronic form, you can upload it to this website using the link on the right side of the screen. SAS Processor: LSISAS2208 dual core RAID on chip (ROC) RAID Levels: , 5, and 6; RAID , and 60 PCI Card Type: Low profile; Single PCIe slot design with full height bracket Missing: megaraid | Must include: megaraid How do I access my MegaRAID BIOS? Knowledge Base 1 Boot the system and look for the BIOS Boot menu screen hotkey and press it a few times. It is usually F8 or F11. Utility To Set Up Sata Or Sas Raid Arrays On The Lsi 9270-8I Megaraid Controller. Raid 0 - HP Z440 Workstation Series Maintenance And Service Manual.
How do I enter LSI RAID configuration? 1 Power off your server module and then power it back on.
Updated the WebBIOS Configuration Utility, MegaRAID Storage Manager, and MegaCLI chapters. 80-00156-01 Rev. D, April 2008. Updated the RAID overview section.