ex3400 admin guide
juniper configuration commands
juniper ex3400 datasheet
juniper ex3400 console port
juniper switch configuration example
juniper ex3400 port numbering
juniper virtual chassis configurationjuniper ex3300 configuration guide pdf

Technical documentation to evaluate, install, or use the Juniper Networks EX3400. FIPS Evaluated Configuration Guide for EX2300 and EX3400 Devices. The following is the factory-default configuration file for an EX3400 switch with 24 ports with PoE capability that runs Junos OS Release 18.2R3 or later. These ports are configured as the DHCP server with the default IP address, 192.168.1.1. The switch can assign an IP address to the management PC in the IP Use this guide to install hardware and perform initial software configuration, routine maintenance, and troubleshooting for the EX3400 switch. The procedures are the same for any Juniper EX2300, EX3400 or EX4300 Ethernet Switch, and any Juniper access points (AP43, AP41, AP 21, and AP61). Overview. To Customize the Basic Configuration Using the CLI · At the Junos OS login prompt, type root to log in. · Start the CLI. · Enter configuration mode. · Delete the ZTP Start here to evaluate, install, or use the Juniper Networks® EX3400 Ethernet Switch. The EX3400 is an effective solution for System Admin Guides. You do not need to configure mixed mode when combining EX4400 multigigabit models with other EX4400 models. Use these guidelines to plan the VCP connections: InIn this guide, we provide a simple, three-step path, to quickly get you up and running an AC-powered EX3400, power it up, and configure basic settings.