Introducing the Intelix Flex Matrix System. The FLX-88 card and cage chassis can accommodate up to four modular expansion cards. Cards are available to handle HDMI, DVI, VGA, RGB, Y/Pb/Pr component video, and/or HDBaseT inputs, while output card choices include HDMI, DVI, and HDBaseT, so it is possible to use this matrix system to drive both local as well as remote zone outputs. Locate the Wiring Harness and look at the color coded wires on the non-plug end. The basic installation requires the black, white, and red wires to be connected to the unit. Note: The remaining wires are not used (except that in specialized digital input scenarios) and should be clipped off or taped up if not being used. Revolabs FLX UC1000/FLX UC1500 Installation and Operation Guide 10-FLXUC1500-EN March 2016 (Rev 2.6.0) 3 Online Resources Resource Website USB 1.1 Rover 1850 Single Port Cat 5e extender from Icron Gefen USB 2.0 Extender Extron USB Extender . 13 Installation Instructions Original Instructions PowerFlex 70 Adjustable Frequency AC Drive This document explains the 5 BASIC STEPS to install and perform a Basic Start-up of the PowerFlex® 70 AC drive. A human interface module (HIM) is required to perform the Basic Start-up routine that is covered in this manual. PowerFlex 40 Adjustable Frequency AC Drive FRN 1.xx - 7.xx User Manual Publication 22B-UM001I-EN-E Preface Overview The purpose of this manual is to provide you with the basic information needed to install, start-up and trou bleshoot the PowerFlex 40 Adjustable Frequency AC Drive. This manual is intended for qualified personnel. You must be able to 1. THE BABYMAKER flx.bike OWNERS MANUAL 2. CONTENTS 1 Welcome/ Contact Us 2 General Warning 6 Geometry 8 Fit 10 What's in the Box 12 Assembly Instructions 21 Touring Package Instructions 24 Maintenance Instructions 25 Rear Wheel 26 Brakes 28 Tires 30 Battery Care 33 Service 34 Warranty 36 More Tips 37 eBike Classifications WELCOME! Reach us by email: hello@flx.bike Visit our Shop: 4170 FLX-1616 Installation Guide Menu (Top) Input Buttons Front Panel Power LED - Indicates the matrix has proper input power. IR Receiver - For use with the included IR remote. Input Buttons -Buttons labeled "1" through "10". Menu Buttons (Top Row) -Buttons labeled "AV", "COMMA", and "UNDO". AV - Used to route Video and Audio inputs to outputs FLEXware manuals. • The non-Mobile FX is ETL listed to UL1741 (Inverters, Converters, Controllers, and Interconnection System Equipment for Use with Distributed Energy Resources). • All Mobile FX Series Inverter/Chargers are ETL listed to UL 458. The FX and VFX Series Inverter/Charger Installation Manual covers the following information: FLX-1616 Installation Guide Menu (Top) Input Buttons Front Panel Power LED - Indicates the matrix has proper input power. IR Receiver - For use with the included IR remote. Input Buttons -Buttons labeled "1" through "10". Menu Buttons (Top Row) -Buttons labeled "AV", "COMMA", and "UNDO". AV - Used to route Video and Audio inputs to outputs i-CAT® Classic 14 bit Detector Panel Carbon Fiber Headrest Xoran version 3.1.62 or later i-CAT® Next Generation Software version 1.9.0.19 or later i-CAT® FLX SmartScan 2.0 or later Treatment Studio 5.2 or later CS 9300 ®, K9500 , 8100D® Carestream/Kodak Orthodontic Imaging Software version 9.0.7 or later *** CAT 5e 4-pr non-plenum approximated at .21 in. diameter, CAT 6 4-pr non-plenum approximated at .25 in. diameter. Actual