2. Place 10 lbs (4.5 kg) of moisture-absorbing desiccant or 5.0 lbs (2.3 kg) of vapor-phase inhibitor crystals near the center of the pump. 3. If the pump is assembled, place an additional one pound (0.5 kg) in the discharge nozzle and securely fasten the nozzle to the discharge elbow. 4. Goulds J+ Series Convertible Well Jet Pump. Ideal for use in shallow wells (less than 25') Ideal for use in deep wells (25' to 90') Please Note* - Requires Shallow or Deep Well Package (Not Included) Corrosion-Resistant Cast Iron Construction. Inside & out Electro-coated paint process. 1 HP NEMA Standard Motor (115 / 230V) ITT Goulds pumps will provide safe, trouble-free service when properly installed, maintained, and operated. Safe installation, operation, and maintenance of ITT Goulds Pumps equipment are an essential end user responsibility. This Pump Safety Manual identifies specific safety risks that must be considered at all times during product life. Make sure that the distance between the baseplate and the foundation surface is between 0.75 in. (19 mm) and 1.50 in. (38 mm). Model 3796 i-FRAME Installation, Operation, and Maintenance Manual. 33. Installation (Continued) d) Make sure that the center jackscrews do not touch the foundation surface yet. 1 2. Submersible Well Pumps from Goulds & Grundfos . Goulds Submersible 4" Well Pumps - GS Stainless Steel Series Pedrollo Flux Booster Pump Manual (Size: 402.8 KB) SACALA1 Instructions (Size: 6.6 MB) TQI_Catalogue Goulds J+ J5 J7 J10 J15 Jet Pumps (Size: 370.9 KB) Goulds Jet Pump Installation